The A4933 is a 3-phase controller for use with N-channel external power MOSFETs and is specifically designed for automotive applications.
A unique charge pump regulator provides full (>10 V) gate drive for battery voltages down to 7 V and allows the A4933 to operate with a reduced gate drive, down to 5.5 V.
A bootstrap capacitor is used to provide the above-battery supply voltage required for N-channel MOSFETs. An internal charge pump for the high-side drive allows DC (100% duty cycle) operation.
Full control over all six power FETs in the 3-phase bridge is provided, allowing motors to be driven with block commutation or sinusoidal excitation. The power FETs are protected from shoot-through by integrated crossover control and resistoradjustable dead time.
Bridge current can be measured using an integrated current sense amplifier. This is an uncommitted differential amplifier with a below-ground common mode range allowing it to be used in low-side current sense applications. Gain and offset are defined by external resistors.
Integrated diagnostics provide indication of undervoltage, overtemperature, and power bridge faults. They can be configured to protect the power FETs under most short circuit conditions. Detailed diagnostics are available as a serial data word.
Westmark Electronics (Allegro & Sanken Semiconductors, Sanken Power Supplies)
1750 - 112th Ave. NE, Suite C225
Bellevue, WA 98004
Email: firstname.lastname@example.org (Judy Hansen, inside sales)
If this is not your local representative, find your local sales rep here.
The A4933 is supplied in a 48-pin LQFP with exposed thermal pad, (suffix JP). This is a small footprint (81 mm²) power package. It is lead (Pb) free with 100% matte tin leadframe plating.
|Part Number||Package Type||Temperature||RoHS
|Part Composition /
|A4933KJP-T||48-lead LQFP||-40°C to 125°C||Yes||View Data||Contact your
local sales rep
|A4933KJPTR-T||48-lead LQFP||-40°C to 125°C||Yes||View Data||Contact your
local sales rep