Site
Map • Contact
Us 中文 • English
Related Links:
Datasheets:
ATS635LSE and ATS636LSE: Programmable Back Biased Hall-Effect Switch with TPOS Functionality (PDF)
Selection Guides:
Hall-Effect Sensor ICs,
Gear-Tooth Hall-Effect Speed Sensor ICs
Technical Publications:
Programming a Back Biased Switch for Proximity Sensing / Proximity Sensing Programming Technique
- Home
- / Products
- / Part Numbers
- / ATS635LSE and ATS636LSE
- / Part Numbers
- / Products
ATS635LSE and ATS636LSE
Programmable Back Biased Hall-Effect Switch with TPOS Functionality
Features and Benefits
- Chopper Stabilization
- Extremely low switchpoint drift over temperature
- On-chip Protection
- Supply transient protection
- Output short-circuit protection
- Reverse-battery protection
- True Zero-Speed Operation
- True Power-On State
- Single-chip Sensing IC for High Reliability
- Optimized Magnetic Circuit
- Wide Operating Voltage Range
- Internal Regulator
Description
The ATS635LSE and ATS636LSE programmable, true power-on state (TPOS), devices are optimized Hall-effect IC and rare-earth pellet combinations that switch in response to magnetic signals created by ferromagnetic targets in gear-tooth sensing and proximity applications.
The devices are externally programmable. A wide range of programmability is available on the magnetic operate point (BOP) while the hysteresis remains fixed. This advanced feature allows for optimization of the circuit switchpoint and can drastically reduce the effects of mechanical placement tolerances found in production environments.
A proprietary dynamic offset cancellation technique, with an internal high-frequency clock, reduces the residual offset voltage, which is normally caused by device overmolding, temperature dependencies, and thermal stress. Having the Hall element and amplifier in a single chip minimizes many problems normally associated with low-level analog signals.
This device is ideal for use in gathering speed or position information using gear-tooth-based configurations, or for proximity sensing with ferromagnetic targets.
The ATS635LSE switches high in the presence of a ferromagnetic target or tooth and switches low in the presence of a target valley, window, or when the ferromagnetic target is removed. The ATS636LSE has the opposite polarity and switches low in the presence of a ferromagnetic target or tooth and switches high in the presence of a target valley, window, or when the ferromagnetic target is removed.
These devices are lead (Pb) free, with 100% matte tin leadframe plating.
Functional Block Diagram
| Part Number | Package Type | RoHS Compliant |
Part Composition/ RoHS Data |
Temperature | Comments | Samples | Distributor Stock |
|---|---|---|---|---|---|---|---|
| ATS635LSETN-T | 4-pin SIP | Yes | view data | -40 °C to 150 °C |
Contact Local Sales Representative or check distributor stock |
||
| ATS636LSETN-T | 4-pin SIP | Yes | view data | -40 °C to 150 °C |
Contact Local Sales Representative or check distributor stock |
Allegro's products are not to be used in life support devices or systems, if a failure of an Allegro product can reasonably be expected to cause the failure of that life support device or system, or to affect the safety or effectiveness of that device or system.