Site
Map • Contact
Us 中文 • English
Related Links:
Datasheets:
ACS758: Thermally Enhanced, Fully Integrated, Hall Effect-Based Linear Current Sensor IC with 100 micro-Ohms Current Conductor (PDF)
Selection Guides:
Hall-Effect Sensor ICs,
Current Sensor ICs
Technical Publications:
Allegro Hall-Effect Based Current Sensor ICs,
Using Allegro Current Sensor ICs in Current Divider Configurations for Extended Measurement Range,
Hall Effect Current Sensing in Hybrid Electric Vehicle (HEV) Applications,
Managing External Magnetic Field Interference When Using ACS71x Current Sensor ICs
FAQs:
ACS758 Current Sensor ICs Frequently Asked Questions
Press Releases:
ACS758: Allegro MicroSystems Announces New Addition To Their Family Of Current Sensor ICs
,
ACS758: Stromsensor für 50 bis 200 A mit 120 kHz Bandbreite und geringem Rauschen,
ACS758: Capteurs de courant pour gamme de 50 à 200A offrant une bande passante de 120khz et une sortie faible bruit
- Home
- / Products
- / Part Numbers
- / ACS758
- / Part Numbers
- / Products
ACS758
Thermally Enhanced, Fully Integrated, Hall Effect-Based Linear Current
Sensor IC with 100 µΩ Current Conductor
Features and Benefits
- Industry-leading noise performance through proprietary amplifier and filter design techniques
- Integrated shield greatly reduces capacitive coupling from current conductor to die due to high dV/dt signals, and prevents offset drift in high-side, high voltage applications
- Total output error improvement through gain and offset trim over temperature
- Small package size, with easy mounting capability
- Monolithic Hall IC for high reliability
- Ultra-low power loss: 100 µΩ internal conductor resistance
- Galvanic isolation allows use in economical, high-side current sensing in high voltage systems
- 3.0 to 5.5 V, single supply operation
- 120 kHz typical bandwidth
- 3 µs output rise time in response to step input current
- Output voltage proportional to AC or DC currents
- Factory-trimmed for accuracy
- Extremely stable output offset voltage
- Nearly zero magnetic hysteresis
Description
The Allegro® ACS758 family of current sensor ICs provides economical and precise solutions for AC or DC current sensing. Typical applications include motor control, load detection and management, power supply and DC-to-DC converter control, inverter control, and overcurrent fault detection.
The device consists of a precision, low-offset linear Hall circuit with a copper conduction path located near the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer. A precise, proportional output voltage is provided by the low-offset, chopper-stabilized BiCMOS Hall IC, which is programmed for accuracy at the factory.
High level immunity to current conductor dV/dt and stray electric fields, offered by Allegro proprietary integrated shield technology, guarantees low output voltage ripple and low offset drift in high-side, high voltage applications.
The output of the device has a positive slope (>VCC / 2) when an increasing current flows through the primary copper conduction path (from terminal 4 to terminal 5), which is the path used for current sampling. The internal resistance of this conductive path is 100 µΩ typical, providing low power loss.
The thickness of the copper conductor allows survival of the device at high overcurrent conditions. The terminals of the conductive path are electrically isolated from the signal leads (pins 1 through 3). This allows the ACS758 family of sensor ICs to be used in applications requiring electrical isolation without the use of opto-isolators or other costly isolation techniques.
The device is fully calibrated prior to shipment from the factory. The ACS758 family is lead (Pb) free. All leads are plated with 100% matte tin, and there is no Pb inside the package. The heavy gauge leadframe is made of oxygen-free copper.
Functional Block Diagram
| Part Number | Package Type | RoHS Compliant |
Part Composition/ RoHS Data |
Temperature | Comments | Samples | Distributor Stock |
|---|---|---|---|---|---|---|---|
| ACS758ECB-200B-PFF-T | 3-lead CB | Yes | view data | -40 °C to 85 °C | new |
Contact Local Sales Representative or check distributor stock |
|
| ACS758ECB-200B-PSS-T | 3-lead CB | Yes | view data | -40 °C to 85 °C | new |
Contact Local Sales Representative or check distributor stock |
|
| ACS758KCB-150B-PFF-T | 3-lead CB | Yes | view data | -40 °C to 125 °C | new |
Contact Local Sales Representative or check distributor stock |
|
| ACS758KCB-150B-PSF-T | 3-lead CB | Yes | view data | -40 °C to 125 °C | new |
Contact Local Sales Representative or check distributor stock |
|
| ACS758KCB-150B-PSS-T | 3-lead CB | Yes | view data | -40 °C to 125 °C | new |
Contact Local Sales Representative or check distributor stock |
|
| ACS758LCB-050B-PFF-T | 3-lead CB | Yes | view data | -40 °C to 150 °C | new |
Contact Local Sales Representative or check distributor stock |
|
| ACS758LCB-100B-PFF-T | 3-lead CB | Yes | view data | -40 °C to 150 °C | new |
Contact Local Sales Representative or check distributor stock |
Allegro's products are not to be used in life support devices or systems, if a failure of an Allegro product can reasonably be expected to cause the failure of that life support device or system, or to affect the safety or effectiveness of that device or system.