Site
Map • Contact
Us δΈζ • English
Related Links:
Datasheets:
A1386: 5 V Field-Programmable Linear Hall Effect Sensor IC with 3 V Supply Functionality Analog Output, and Miniature Package Options (PDF)
Selection Guides:
Hall-Effect Sensor ICs,
Linear Hall-Effect Sensor ICs
Press Releases:
A1386: Allegro Introduces Unique User Programmable Linear Sensor IC To Automotive Market,
A1386: Anwenderprogrammierbare lineare Dual-Mode-Sensoren für die Kfz-Elektronike,
A1386: Capteur à effet Hall linéaire programmable offrant deux modes de fonctionnement
Design Support Tools:
ASEK-02 Sensor IC Evaluation Kit,
Allegro Sensor Evaluation Kit Technical Guide
- Home
- / Products
- / Part Numbers
- / A1386
- / Part Numbers
- / Products
A1386
5 V Field-Programmable Linear Hall Effect Sensor IC with 3 V
Supply Functionality, Analog Output, and Miniature Package Options
Features and Benefits
- Low power consumption using 3 V supply
- Factory programmed sensitivity temperature coefficient (0.13%/°C nominal)
- Programmability at end-of-line
- Ratiometric sensitivity, quiescent voltage output, and clamps for interfacing with application DAC
- Temperature-stable quiescent voltage output and sensitivity
- Precise recoverability after temperature cycling
- Output voltage clamps provide short circuit diagnostic capabilities
- Wide ambient temperature range: β40°C to 150°C
- Resistant to mechanical stress
- Miniature package options
Description
The Allegro® A1386 programmable, linear, Hall effect sensor IC is designed for low power, high accuracy, and small package size applications. The accuracy of this device is enhanced via programmability on the output pin for end-of-line optimization without the added complexity and cost of a fully programmable device.
The A1386 has two operating modes, normal and low power. In normal operation mode the A1386 operates much like its predecessors, the A1381, A1382, A1383, and A1384, as a highly accurate, user-programmable linear sensor IC with a ratiometric output. In low power mode, the device actually disengages some internal components in order to reduce power consumption. Although the accuracy of the device is substantially reduced during low power operation, it remains effective as a detector of magnetic regions (such as north and south poles on a rotating ring magnet). This unique feature allows the device to be used in systems that are put to sleep, during which time there may be only 3 V available, or in applications that have start-up conditions where the available supply voltage may drop below 4.5 V for a period of time.
This ratiometric Hall effect device provides a voltage output that is proportional to the applied magnetic field over the entire 2.7 to 5.5 V supply operating region. Both the quiescent voltage output and magnetic sensitivity are user adjustable. The quiescent voltage output can be set to approximately 50% of the supply voltage, and the sensitivity adjusted between 1.90 and 3.50 mV/G for VCC = 5 V. The sensitivity temperature coefficient is programmed at the factory, at 0.13%/°C nominal, to compensate for Neodymium-style magnets. The features of this linear device make it ideal for the high accuracy requirements of automotive and industrial applications. Performance is guaranteed over an extended temperature range, β40°C to 150°C.
Each device contains a BiCMOS monolithic circuit that integrates a Hall element, temperature-compensating circuitry to reduce the intrinsic sensitivity drift of the Hall element, a small-signal high-gain amplifier, a clamped low-impedance output stage, and a proprietary dynamic offset cancellation technique.
The A1386 device is provided in a 3-pin ultramini single-in-line package (UA suffix), and a 3-pin surface mount SOT-23W package (LH suffix). Both packages are lead (Pb) free, with 100% matte tin leadframe plating.
Functional Block Diagram
| Part Number | Package Type | RoHS Compliant |
Part Composition/ RoHS Data |
Temperature | Comments | Samples | Distributor Stock |
|---|---|---|---|---|---|---|---|
| A1386LLHLT-T | 3-lead SOT | Yes | view data | -40 °C to 150 °C | new |
Contact Local Sales Representative or check distributor stock |
|
| A1386LUA-T | 3-pin SIP | Yes | view data | -40 °C to 150 °C | new |
Contact Local Sales Representative or check distributor stock |
Allegro's products are not to be used in life support devices or systems, if a failure of an Allegro product can reasonably be expected to cause the failure of that life support device or system, or to affect the safety or effectiveness of that device or system.