Site
Map • Contact
Us 中文 • English
High-Performance Power ICs and Hall-Effect Sensors
Related Links:
Datasheets:
UDx2559: Protected Quad Power Drivers (PDF)
Selection Guides:
Power Integrated Circuits,
Automotive ICs,
Relay/Solenoid Drivers
- Home
- / Products
- / Part Numbers
- / UDx2559
- / Part Numbers
- / Products
UDx2559
Protected Quad Power Drivers
Features
- 700 mA output current per channel
- Independent overcurrent protection for each driver
- Thermal protection for device and each driver
- Low output-saturation voltage
- Integral output flyback diodes
- TTL and 5 V CMOS-compatible inputs
Description
Providing improved output current limiting, the UDK, UDN, and UDQ2559B, EB, and LB quad power drivers combine AND logic gates and high-current bipolar outputs with complete output protection. Each of the four outputs sink 700 mA in the on state. The outputs have a minimum breakdown voltage (load dump) of 60 V and a sustaining voltage of 40 V. The inputs are compatible with TTL and 5 V CMOS logic systems.
Overcurrent protection for each channel has been designed into these devices and is activated at approximately 1 A. It protects each output from short circuits with supply voltages up to 25 V. When an output current trip point is reached, that output stage is driven linearly resulting in a reduced output current level. If an over-current or short-circuit condition continues, the thermal-limiting circuits will first sense the rise in junction temperature and then the rise in chip temperature, further decreasing the output current. Under worst-case conditions, these devices will tolerate short circuits on all outputs, simultaneously.
These devices can be used to drive various loads including incandescent lamps (without warming or limiting resistors) or inductive loads such as relays, solenoids, or dc stepping motors.
The packages offer fused leads for enhanced thermal dissipation. Package B is a 16-pin power DIP with exposed tabs, EB is a 28-lead power PLCC, and LB is a 16-lead power wide-body SOIC for surface-mount applications. The lead (Pb) free versions have 100% matte tin leadframe plating.
Functional Block Diagram
| Part Number | Package Type | RoHS Compliant |
Part Composition/ RoHS Data |
Temperature | Comments | Samples | Distributor Stock |
|---|---|---|---|---|---|---|---|
| UDN2559B | 16-pin DIP | No | view data | -20 °C to 85 °C | discontinued | samples not available | |
| UDN2559B-T | 16-pin DIP | Yes | view data | -20 °C to 85 °C | |||
| UDN2559EB | 28-lead PLCC | No | view data | -20 °C to 85 °C | discontinued | samples not available | |
| UDN2559EB-T | 16-pin DIP | Yes | view data | -20 °C to 85 °C | |||
| UDN2559EBTR | 28-lead PLCC | No | view data | -20 °C to 85 °C | discontinued | samples not available | |
| UDN2559LB | 16-lead SOIC | No | view data | -20 °C to 85 °C | discontinued | samples not available | |
| UDN2559LB-T | 16-lead SOIC | Yes | view data | -20 °C to 85 °C | |||
| UDQ2559B | 16-pin DIP | No | view data | -40 °C to 85 °C | discontinued | samples not available | |
| UDQ2559B-T | 16-pin DIP | Yes | view data | -40 °C to 85 °C | |||
| UDQ2559LB | 16-lead SOIC | No | view data | -40 °C to 85 °C | discontinued | samples not available | |
| UDQ2559LB-T | 16-lead SOIC | Yes | view data | -40 °C to 85 °C | Contact Marketing Representative | ||
| UDK2559B | 16-pin DIP | No | view data | -40 °C to 125 °C | |||
| UDK2559B-T | 16-pin DIP | Yes | view data | -40 °C to 125 °C | |||
| UDK2559EB | 28-lead PLCC | No | view data | -40 °C to 125 °C | |||
| UDK2559EB-T | 28-lead PLCC | Yes | view data | -40 °C to 125 °C | |||
| UDK2559EBTR | 28-lead PLCC | No | view data | -40 °C to 125 °C | samples not available | ||
| UDK2559LB | 16-lead SOIC | No | view data | -40 °C to 125 °C | not for new design | samples not available | |
| UDK2559LB-T | 16-lead SOIC | Yes | view data | -40 °C to 125 °C | |||
| UDK2559LBTR | 16-lead SOIC | No | view data | -40 °C to 125 °C | samples not available |
Allegro's products are not to be used in life support devices or systems, if a failure of an Allegro product can reasonably be expected to cause the failure of that life support device or system, or to affect the safety or effectiveness of that device or system.