Site
Map • Contact
Us 中文 • English
Related Links:
Datasheets:
A6832: DABiC-5 32-Bit Serial Input Latched Sink Drivers (PDF)
Selection Guides:
Power Integrated Circuits,
Relay/Solenoid Drivers
Technical Publications:
Product Replacement for the 58xx Family of Serial-Input, Latched Sink Drivers
Press Releases:
A6800 Series: Allegro MicroSystems, Inc. Releases New Latched Sink Drivers
- Home
- / Products
- / Part Numbers
- / A6832
- / Part Numbers
- / Products
A6832
DABiC-5 32-Bit Serial Input Latched Sink Drivers
This device is in production, however, it has been deemed pre-end of life.
Date of status change: May 3, 2010.
For existing customer transition, and for new customers or new applications, refer to your Allegro sales representative.
Features
- 3.3 V to 5 V logic supply range
- To 10 MHz data input rate
- Schmitt trigger inputs for improved noise immunity
- Low-power CMOS logic and latches
- 40 V current sink outputs
- Low saturation voltage
- -40°C operation available
Applications
- Thermal printheads
- Multiplexed LED displays
- Incandescent lamps
Description
Intended originally to drive thermal printheads, the A6832 has been optimized for low output-saturation voltage, high-speed operation, and pin configurations that are the most convenient for the tight space requirements of high-resolution printheads. These integrated circuits can also be used to drive multiplexed LED displays or incandescent lamps at up to 125 mA peak current. The combination of bipolar and MOS technologies gives the A6832 arrays an interface flexibility beyond the reach of standard buffers and power driver circuits.
The devices each have 32 bipolar NPN open-collector saturated drivers, a CMOS data latch for each of the drivers, two 16-bit CMOS shift registers, and CMOS control circuitry. The high-speed CMOS shift registers and latches allow operation with most microprocessor-based systems. Use of these drivers with TTL may require input pull-up resistors to ensure an input logic high. MOS serial data outputs permit cascading for interface applications requiring additional drive lines.
The A6832 is supplied in a 44-lead plastic leaded chip carrier (package suffix EP), for surface-mount applications requiring minimum area. These devices are lead (Pb) free, with 100% matte tin plated leadframes.
Functional Block Diagram
| Part Number | Package Type | RoHS Compliant |
Part Composition/ RoHS Data |
Temperature | Comments | Samples | Distributor Stock |
|---|---|---|---|---|---|---|---|
| A6832SEPTR-T | 44-lead PLCC | Yes | view data | -20 °C to 85 °C | pre-eol |
Contact Local Sales Representative or check distributor stock |
|
| A6832EEPTR-T | 44-lead PLCC | Yes | view data | -40 °C to 85 °C | pre-eol |
Contact Local Sales Representative or check distributor stock |
Allegro's products are not to be used in life support devices or systems, if a failure of an Allegro product can reasonably be expected to cause the failure of that life support device or system, or to affect the safety or effectiveness of that device or system.