Allegro MicroSystems, Inc. Site MapContact Us
中文English

High-Performance Power ICs and Hall-Effect Sensors

STR-W6753, STR-W6754, and STR-W6756
Quasi-Resonant Flyback Switching Regulator

Pin-Out or Package
Max. PO (W) at Max. MOSFET Part Number
230 V ac 85 ~ 265 V ac rDS(on) (Ω)
120 58 1.70 STR-W6753
160 100 0.96 STR-W6754
240 140 0.73 STR-W6756

Features and Benefits

  • Rugged 650 V Avalanche-Rated MOSFET
    Simplified Surge Absorption
    No VDSS Derating Required
  • Choice of rDS(on)
  • Two Operational Modes by Automatic Switching:
    Quasi-Resonant Mode for Normal Operation
    Burst Mode for Standby Operation or Light Loads
  • Automatic or Manually Triggered Burst Standby
    Input Power <0.1 W at No Load
  • Low Operating Current (6 mA typ)
  • Auto-Bias Function
    Stable Burst Operation Without Generating Interference
  • Internal Off-Timer Circuit
  • Built-In Constant-Voltage Drive
  • Multiple Protections:
    Pulse-by-Pulse Overcurrent Protection
    Overload Protection with Auto Recovery
    Latching Overvoltage Protection
    Undervoltage Lockout with Hysteresis
  • RoHS Compliant

Description

The Series STR-W6700 includes quasi-resonant topology ICs designed for SMPS power supplies, showing lower EMI noise characteristics - especially at more than 2 MHz - than conventional PWM solutions. They utilize a soft switching to turn on the internal avalanche-guaranteed MOSFET at a close point to ground level (VDS bottom point) through the resonant phenomenon of a primary inductor and resonant capacitor. The package is a fully molded TO-220, which contains the controller chip and MOSFET, and enables the output power up to 140 W at universal input, or 240 W at 230 VAC input. The bottom-skip function skips the first bottom of VDS and turns on the MOSFET at the second bottom point to minimize increase of operational frequency at light output load, improving system-level efficiency over the entire load condition. Two standby functions reduce the input power at very light output load conditions; one is an auto-burst mode operation internally triggered by sensing on-time, and the other is a manual standby mode that is executed by clamping the secondary output.

Functional Block Diagram

Functional Block Diagram

Complete Part Numbers
Part Number Package Type RoHS
Compliant
Part Composition/
RoHS Data
Temperature Comments Distributor Stock Samples
STR-W6753 8-lead TO-220 Yes -- -20 °C to  115 °C new  
Contact Local Sales Representative
or check distributor stock
STR-W6754 8-lead TO-220 Yes -- -20 °C to  115 °C new  
Contact Local Sales Representative
or check distributor stock
STR-W6756 8-lead TO-220 Yes -- -20 °C to  115 °C new  
Contact Local Sales Representative
or check distributor stock

Allegro's products are not to be used in life support devices or systems, if a failure of an Allegro product can reasonably be expected to cause the failure of that life support device or system, or to affect the safety or effectiveness of that device or system.

Copyright © 2009 Allegro MicroSystems, Inc. 115 Northeast Cutoff, Worcester, MA 01606 USA Phone: 1.508.853.5000 Fax: 1.508.853.7895