Site
Map • Contact
Us 中文 • English
Related Links:
Datasheets:
SLA7080M Series Unipolar 2-Phase Stepping Motor Driver ICs (PDF)
Selection Guides:
Power Motor Drivers - Unipolar Stepper
- Home
- / Products
- / Part Numbers
- / SLA7080M Series
- / Part Numbers
- / Products
SLA7080M Series
Unipolar 2-Phase Stepping Motor Driver ICs
Features
- Power supply voltage, VBB, 46 V maximum; 10 to 44 V normal operating range
- Logic supply voltage, VDD, 3 to 5.5 V
- Four output currents, IO(max) , options: 1, 1.5, 2, and 3 A
- Stepping control for phase input (full or half step)
- Built-in sense resistor detects motor current
- Compact ZIP 23-pin molded package (SLA package)
- Self-excitation PWM control with fixed off-time
- Built-in synchronous rectifying circuit reduces losses at PWM-off
- Synchronous PWM function prevents noise generation in motor Hold mode
- Sleep function reduces power consumption of drivers in Standby mode
- Protection circuit detects motor coil open/short and prevents overheating due to avalanche breakdown
- Externally-adjustable (3.2 µs/5.2 µs) blanking time (minimum on-time)
Description
This document describes the function and features of SLA7080M series, which are unipolar 2-phase stepping motor driver ICs. Four levels of output current are available from the incorporated MOSFETs, corresponding to the rated output current ratings. All current ratings are available with protection against motor coil shorts or motor open wire detection.
The SLA7080M series has a multichip structure, for enhanced thermal dispersion. The Control IC (MIC), four power elements (MOSFET), and dual sense resistors, are all separate ICs.
Built-in sense resistors for each phase allow accurate tracking of performance without additional external components. Low-power sleep mode as well as reduced power during PWM off-time maximize energy savings.
Functional Block Diagram
| Part Number | Package Type | RoHS Compliant |
Part Composition/ RoHS Data |
Temperature | Comments | Distributor Stock | Samples |
|---|---|---|---|---|---|---|---|
| SLA7080MPR | 23-pin SIP | Yes | -- | -20 °C to 85 °C | new |
Contact Local Sales Representative or check distributor stock |
|
| SLA7081MPR | 23-pin SIP | Yes | -- | -20 °C to 85 °C | new |
Contact Local Sales Representative or check distributor stock |
|
| SLA7082MPR | 23-pin SIP | Yes | -- | -20 °C to 85 °C | new |
Contact Local Sales Representative or check distributor stock |
|
| SLA7083MPR | 23-pin SIP | Yes | -- | -20 °C to 85 °C | new |
Contact Local Sales Representative or check distributor stock |
Allegro's products are not to be used in life support devices or systems, if a failure of an Allegro product can reasonably be expected to cause the failure of that life support device or system, or to affect the safety or effectiveness of that device or system.