A8290: Single LNB Supply and Control Voltage Regulator

Intended for analog and digital satellite receivers, this single low noise block converter regulator (LNBR) is a monolithic linear and switching voltage regulator, specifically designed to provide the power and the interface signals to an LNB down converter via coaxial cable. The A8290 requires few external components, with the boost switch and compensation circuitry integrated inside of the device. A high switching frequency is chosen to minimize the size of the passive filtering components, further assisting in cost reduction. The high levels of component integration ensure extremely low noise and ripple figures.

The A8290 has been designed for high efficiency, utilizing the Allegro advanced BCD process. The integrated boost switch has been optimized to minimize both switching and static losses. To further enhance efficiency, the voltage drop across the tracking regulator has been minimized.

The A8290 has integrated tone detection capability, to support full two-way DiSEqC™ communications. Several schemes are available for generating tone signals, all the way down to no-load, and using either the internal clock or an external time source. A DiSEqC™ filter bypass switch is also integrated, to minimize the output impedance during tone generation.

A comprehensive set of fault registers are provided, which comply with all the common standards, including: overcurrent, thermal shutdown, undervoltage, cable disconnect, power not good, and tone detect.

The device uses a 2-wire bidirectional serial interface, compatible with the I2C™ standard, that operates up to 400 kHz.

The A8290 is supplied in a lead (Pb) free 28-lead MLP/QFN.

This part is in production but have been determined to be LAST TIME BUY. This classification indicates that the product is obsolete and notice has been given. Sale of this device is currently restricted to existing customer applications. The device should not be purchased for new design applications because of obsolescence in the near future. Samples are no longer available Date of status change: June 5, 2017. Deadline for receipt of LAST TIME BUY orders: December 29, 2017.

Recommended Substitutions: For existing customer transition, and for new customers or new applications, refer to the generation 4 and 5 devices.

DATASHEETS
SAMPLE & BUY
Arrow Electronics (Distributor, Allegro & Sanken Semiconductors)
25 Hub Drive
Melville, NY 11747
Phone: 1-800-777-2776 for local distributor
Web: www.arrow.com
Digi-Key Corporation (Distributor, Allegro & Sanken Semiconductors)
701 Brooks Avenue South
Thief River Falls, MN 56701
Phone: 800-344-4539 or 218-681-6674
Fax: 218-681-3380
Web: www.digikey.com
Email: webmaster@digikey.com

Digi-Key Corporation (Distributor, Allegro & Sanken Products)
701 Brooks Avenue South
Thief River Falls, MN 56701
United States
Phone: 800-344-4539 or 218-681-6674
Fax: 218-681-3380
Web: www.digikey.com
Email: webmaster@digikey.com

Digi-Key Corporation (Distributor, Allegro & Sanken Products)
701 Brooks Avenue South
Thief River Falls, MN 56701
United States
Phone: 800-344-4539 or 218-681-6674
Fax: 218-681-3380
Web: www.digikey.com
Email: webmaster@digikey.com

Digi-Key Corporation (Distributor, Allegro & Sanken Products)
701 Brooks Avenue South
Thief River Falls, MN 56701
United States
Phone: 800-344-4539 or 218-681-6674
Fax: 218-681-3380
Web: www.digikey.com
Email: webmaster@digikey.com

Digi-Key Corporation (Distributor, Allegro & Sanken Products)
701 Brooks Avenue South
Thief River Falls, MN 56701
United States
Phone: 800-344-4539 or 218-681-6674
Fax: 218-681-3380
Web: www.digikey.com
Email: webmaster@digikey.com

Digi-Key Corporation (Distributor, Allegro & Sanken Products)
701 Brooks Avenue South
Thief River Falls, MN 56701
United States
Phone: 800-344-4539 or 218-681-6674
Fax: 218-681-3380
Web: www.digikey.com
Email: webmaster@digikey.com

Digi-Key Corporation (Distributor, Allegro & Sanken Products)
701 Brooks Avenue South
Thief River Falls, MN 56701
United States
Phone: 800-344-4539 or 218-681-6674
Fax: 218-681-3380
Web: www.digikey.com
Email: webmaster@digikey.com

If this is not your local representative, find your local sales rep here.

RECEIVE PRODUCT ALERTS
We'll notify you when there are updates to this product. Sign Up
  • Features and BenefitsFeatures and Benefits
  • PackagingPackaging
  • Technical DocsTechnical Docs
  • NewsNews
  • 2-wire serial I2C™-compatible interface: control (write) and status (read)
  • LNB voltages (16 programmable levels) compatible with all common standards
  • Tracking switch-mode power converter for lowest dissipation
  • Integrated converter switches and current sensing
  • Output current limit of 900 mA typical, with 48 ms timer
  • Static current limit circuit allows full current at startup and 13→18 V output transition; reliably starts wide load range
  • Push-pull output stage minimizes 13→18 V and 18→13 V output transition times for highly capacitive loads
  • Adjustable rise/fall time via external timing capacitor
  • Built-in tone oscillator, factory-trimmed to 22 kHz facilitates DiSEqC™ tone encoding, even at no-load
  • Four methods of 22 kHz tone generation, via I2C™ data bits and/or external pin
  • Filter bypass MOSFET minimizes losses during tone transmit
  • 22 kHz tone detector facilitates DiSEqC™ 2.0 decoding
  • Diagnostics for output voltage level, input supply UVLO, and DiSEqC™ tone output
  • Auxiliary modulation input
  • LNB overcurrent with timer
  • Cable disconnect diagnostic

The A8290 is supplied in a lead (Pb) free 28-lead MLP/QFN.

ET QFN with exposed pad 28 lead

There are no news items available for this product.

Click the image to view larger
Product Image Functional Block Diagram

Part Number Specifications and Availability

Part Number Package Type Temperature RoHS
Compliant
Part Composition /
RoHS Data
Comments Samples Check
Distributor Stock
A8290SETTR-T 28-lead QFN -20°C to 85°C Yes View Data Last time buy Contact your
local sales rep
Check Stock

Allegro’s products are not to be used in any devices or systems, including but not limited to life support devices or systems, in which a failure of Allegro’s product can reasonably be expected to cause bodily harm.

Copyright © 2017 Allegro MicroSystems, LLC

Sitemap  |  Privacy Policy  |  Contact Webmaster

Follow us on: LinkedIn YouTube Google+ Follow Allegro on Twitter

Careers   |   Contact Sales   |   Home   |   Legal   |   Quality & Environment   |   Request Samples