A8582: Wide Input Voltage, 2.4 MHz, 2.0 A Asynchronous Buck Regulator

The A8582 is an adjustable frequency, high output current, PWM regulator that integrates a low resistance, high-side, N-channel MOSFET. The A8582 incorporates current-mode control to provide simple compensation, excellent loop stability, and fast transient response. The A8582 utilizes external compensation to accommodate a wide range of power components to optimize transient response without sacrificing stability.

The A8582 regulates input voltages from 4.7 to 36 V, down to output voltages as low as 0.8 V, and is able to supply at least 2.0 A of load current. The A8582 features include an externally adjustable switching frequency, an externally set soft start time to minimize inrush currents, an EN/SYNC input to either enable VOUT and/or synchronize the PWM switching frequency, and a Power OK (POK) output to indicate when VOUT is within regulation. The A8582 only turns on the lower FET to charge the boot capacitor when needed, not at every PWM cycle. This improves light load efficiency and provides no-load currents as low as 4 mA at 2 MHz. The sleep mode current of the A8582 control circuitry is less than 3 µA.

Protection features include VIN undervoltage lockout (UVLO), pulse-by-pulse overcurrent protection (OCP), hiccup mode shortcircuit protection (HIC), overvoltage protection (OVP), and thermal shutdown (TSD). In addition, the A8582 provides unique missing diode (D1) protection, open-circuit, adjacent pin short-circuit, and short-to-ground protection at every pin to satisfy the most demanding applications.

Applications include:

  • GPS/infotainment
  • Automobile audio
  • Home audio
  • Network and telecom

The A8582 device is available in a 16-pin TSSOP package with exposed pad for enhanced thermal dissipation. It is lead (Pb) free, with 100% matte tin leadframe plating.

DATASHEETS
SAMPLE & BUY

Astrorep Inc. (Allegro and Sanken Semiconductors, Sanken Power Supplies)
141 John Street, Suite 300
Babylon, NY 11702
Phone: (631)422-2500
Fax: (631)422-2504
Web: www.astrorepinc.com
Email: donna.tweedy@astrorepinc.com

If this is not your local representative, find your local sales rep here.

RECEIVE PRODUCT ALERTS
We'll notify you when there are updates to this product. Sign Up
  • Features and BenefitsFeatures and Benefits
  • PackagingPackaging
  • Technical DocsTechnical Docs
  • NewsNews
  • Automotive AEC-Q100 qualified
  • Wide operating voltage range: 4.7 to 36 V
  • UVLO stop threshold is at 3.8 V (typ)
  • Supports 40 V input for surge and load dump testing
  • Capable of at least 2.0 A steady-state output current
  • Adjustable output voltage as low as 0.8 V
  • Internal 70 mΩ high-side switching MOSFET
  • Adjustable switching frequency, fSW: 0.25 to 2.4 MHz
  • Synchronization to external clock: 1.2 × fSW to 1.5 × fSW
  • Sleep mode supply current less then 3 µA
  • Soft start time externally set via the SS pin
  • Very low no-load current, typically 3.5 mA
  • Pre-bias startup compatible
  • Power OK (POK) output
  • Pulse-by-pulse current limiting (OCP)
  • Hiccup mode short-circuit protection (HIC)
  • Overtemperature protection (TSD)
  • Overvoltage protection (OVP)
  • Missing asynchronous diode (D1) protection
  • Open-circuit and adjacent pin short-circuit tolerant
  • Short-to-ground tolerant at every pin
  • Externally adjustable compensation
  • Stable with ceramic output capacitors

The A8582 device is available in a 16-pin TSSOP package with exposed pad for enhanced thermal dissipation (suffix LP). It is lead (Pb) free, with 100% matte tin leadframe plating.

LP TSSOP 16 pin

 

Click the image to view larger
Product Image Functional Block Diagram Typical Application

Part Number Specifications and Availability

Part Number Package Type Temperature RoHS
Compliant
Part Composition /
RoHS Data
Comments Samples Check
Distributor Stock
A8582KLPTR-T 16-lead TSSOP -40°C to 125°C Yes View Data Contact your
local sales rep
Check Stock
APEK8582KLP-05-MH DEMO BOARD -40°C to 125°C No -- Contact your
local sales rep
Check Stock
APEK8582KLP-08-MH DEMO BOARD -40°C to 125°C No -- Contact your
local sales rep
Check Stock
APEK8582KLP-33-MH DEMO BOARD -40°C to 125°C No -- Contact your
local sales rep
Check Stock

Allegro’s products are not to be used in any devices or systems, including but not limited to life support devices or systems, in which a failure of Allegro’s product can reasonably be expected to cause bodily harm.

Copyright © 2017 Allegro MicroSystems, LLC

Sitemap  |  Privacy Policy  |  Contact Webmaster

Follow us on: LinkedIn YouTube Google+ Follow Allegro on Twitter

Careers   |   Contact Sales   |   Home   |   Legal   |   Quality & Environment   |   Request Samples