Site
Map • Contact
Us 中文 • English
Related Links:
Datasheets:
ATS682LSH: Miniature, Two-Wire, True Zero Speed Differential Peak-Detecting Sensor IC (PDF)
Selection Guides:
Hall-Effect Sensor ICs,
Gear-Tooth Hall-Effect Speed Sensor ICs
Press Releases:
ATS682: Allegro MicroSystems Introduces a Two-Wire, True Zero-Speed, Differential Peak-Detecting Sensor IC,
ATS682: Differenzieller 2-Draht-Hallsensor mit Peak-Erfassung und Funktion ab 0Hz,
ATS682: Capteur à effet Hall différentiel deux fils à détection de pic permettant un fonctionnement à vitesse nulle
- Home
- / Products
- / Part Numbers
- / ATS682
- / Part Numbers
- / Products
ATS682
Miniature, Two-Wire, True Zero Speed Differential Peak-Detecting Sensor
IC
Features
- True zero-speed operation
- Automatic Gain Control (AGC) for air gap independent switchpoints
- Automatic Offset Adjustment (AOA) for signal processing optimization
- Running-mode calibration for continuous optimization
- Precise duty cycle over operating temperature range
- Internal current regulator for two-wire operation
- Undervoltage lockout
- On-chip voltage regulator with wide operating voltage range and stability in the presence of a variety of complex load impedances
- Single chip IC for high reliability
Description
The ATS682LSH is a Hall-effect integrated circuit and rare earth pellet combination that provides a user-friendly solution for true zero-speed digital gear-tooth sensing in two-wire applications. This small package, with an optimized two-wire leadframe, can be easily assembled and used in conjunction with a wide variety of gear shapes and sizes.
The integrated circuit incorporates a dual-element Hall-effect circuit and signal processing that switches in response to differential magnetic signals created by ferrous gear teeth. The circuitry contains a sophisticated digital circuit that reduces magnet and system offsets, calibrates the gain for air gap independent switchpoints and provides true zero-speed operation.
Signal optimization occurs at power-up through the adjustment of offset and gain and is and is maintained throughout operation with the use of a running-mode calibration scheme. Runningmode calibration provides immunity from environmental effects such as micro-oscillations of the sensed target or sudden air gap changes.
The regulated current output is configured for two-wire interface circuitry and is ideally suited for obtaining speed information in wheel speed applications. The Hall element spacing is optimized for high resolution, small diameter targets. The package is lead (Pb) free, with 100% matte tin lead frame plating.
Functional Block Diagram
| Part Number | Package Type | RoHS Compliant |
Part Composition/ RoHS Data |
Temperature | Comments | Samples | Distributor Stock |
|---|---|---|---|---|---|---|---|
| ATS682LSHTN-T | 4-pin SIP | Yes | view data | -40 °C to 150 °C | new |
Contact Local Sales Representative or check distributor stock |
Allegro's products are not to be used in life support devices or systems, if a failure of an Allegro product can reasonably be expected to cause the failure of that life support device or system, or to affect the safety or effectiveness of that device or system.