Site
Map • Contact
Us 中文 • English
Related Links:
Datasheets:
ACS754xCB-050: Current Sensor IC (PDF),
ACS754xCB-100: Current Sensor IC (PDF),
ACS754xCB-130: Current Sensor IC (PDF),
ACS754xCB-150: Current Sensor IC (PDF),
ACS754SCB-200: Current Sensor IC (PDF)
Selection Guides:
Hall-Effect Sensor ICs,
Current Sensor ICs
Technical Publications:
Allegro Hall-Effect Based Current Sensor ICs,
Isolated Open Loop Current Sensing Using Hall Effect Technology in an Optimized Magnetic Circuit (PDF),
Using Allegro Current Sensor ICs in Current Divider Configurations for Extended Measurement Range,
Managing Noise Levels in the ACS75x Current Sensor ICs (PDF)
FAQs:
ACS754 Current Sensor IC Frequently Asked Questions
Press Releases:
ACS754: Allegro MicroSystems, Inc. Launches Improved Accuracy Addition to Current Sensor IC Family
Design Support Tools:
ASEK754LCB-050 Current Sensor IC Evaluation Kit,
ASEK754LCB-100 Current Sensor IC Evaluation Kit,
ASEK754LCB-130 Current Sensor IC Evaluation Kit,
ASEK754SCB-050 Current Sensor IC Evaluation Kit,
ASEK754SCB-100 Current Sensor IC Evaluation Kit,
ASEK754SCB-130 Current Sensor IC Evaluation Kit
- Home
- / Products
- / Part Numbers
- / ACS754
- / Part Numbers
- / Products
ACS754
Current Sensor ICs
These parts are in production but have been determined to be LAST TIME BUY. Sale of this device is currently restricted to existing customer applications. The device should not be purchased for new design applications because of obsolescence in the near future. Samples are no longer available. Date of status change: February 1, 2010.
The deadline for receipt of orders is April 30, 2010. For existing customer transition, and for new customers or new applications, refer to the ACS756 and ACS758.
Features and Benefits
- Monolithic Hall IC for high reliability
- Single +5 V supply
- 3 kVRMS isolation voltage between terminals 4/5 and pins 1/2/3 for up to 1 minute
- 35 kHz bandwidth
- Automotive temperature range
- End-of-line factory-trimmed for gain and offset
- Ultra-low power loss: 100 µΩ internal conductor resistance
- Ratiometric output from supply voltage
- Extremely stable output offset voltage
- Small package size, with easy mounting capability
- Output proportional to AC and DC currents
Description
The Allegro ACS75x family of current sensor ICs provides economical and precise solutions for current sensing in industrial, automotive, commercial, and communications systems. The device package allows for easy implementation by the customer. Typical applications include motor control, load detection and management, power supplies, and overcurrent fault protection.
The device consists of a precision, low-offset linear Hall sensor circuit with a copper conduction path located near the die. Applied current flowing through this copper conduction path generates a magnetic field which is sensed by the integrated Hall IC and converted into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer. A precise, proportional voltage is provided by the low-offset, chopper-stabilized BiCMOS Hall IC, which is programmed for accuracy at the factory.
The output of the device has a positive slope (>VCC / 2) when an increasing current flows through the primary copper conduction path (from terminal 4 to terminal 5), which is the path used for current sensing. The internal resistance of this conductive path is typically 100 µΩ, providing low power loss. The thickness of the copper conductor allows survival of the device at up to 5× overcurrent conditions. The terminals of the conductive path are electrically isolated from the sensor leads (pins 1 through 3). This allows the ACS75x family of sensor ICs to be used in applications requiring electrical isolation without the use of opto-isolators or other costly isolation techniques.
The device is fully calibrated prior to shipment from the factory. The ACS75x family is lead (Pb) free. All pins are coated with 100% matte tin, and there is no lead inside the package. The heavy gauge leadframe is made of oxygen-free copper.
Functional Block Diagram
| Part Number | Package Type | RoHS Compliant |
Part Composition/ RoHS Data |
Temperature | Comments | Samples | Distributor Stock |
|---|---|---|---|---|---|---|---|
| ACS754SCB-200-PFF | 3-lead CB | Yes | view data | -20 °C to 85 °C | last-time buy |
Contact Local Sales Representative or check distributor stock |
|
| ACS754KCB-150-PFF | 3-lead CB | Yes | view data | -40 °C to 125 °C | last-time buy |
Contact Local Sales Representative or check distributor stock |
|
| ACS754LCB-050-PFF | 3-lead CB | Yes | view data | -40 °C to 150 °C | last-time buy |
Contact Local Sales Representative or check distributor stock |
|
| ACS754LCB-100-PFF | 3-lead CB | Yes | view data | -40 °C to 150 °C | last-time buy |
Contact Local Sales Representative or check distributor stock |
Allegro's products are not to be used in life support devices or systems, if a failure of an Allegro product can reasonably be expected to cause the failure of that life support device or system, or to affect the safety or effectiveness of that device or system.