Site
Map • Contact
Us
Datasheets:
A6810: DABiC-IV 10-Bit Serial-Input Latched Source Drivers with Active Pull-Downs (PDF),
6810: DABiC-IV 10-Bit Serial-Input Latched Source Drivers with Active Pull-Downs (PDF)
Selection Guides:
Power Integrated Circuits,
Automotive ICs,
Vacuum-Fluorescent Display Drivers
Technical Publications:
Product Replacement for the 58xx Family of Serial-Input, Latched Source Drivers
Press Releases:
Serial-Input, Latched Source Drivers with Slew-Rate Limiting
The A6810 combines 10-bit CMOS shift registers, accompanying data latches, and control circuitry with bipolar sourcing outputs and PNP active pull-downs. Designed primarily to drive vacuum-fluorescent (VF) displays, the 60 V and –40 mA output ratings also allow this device to be used in many other peripheral power driver applications. The A6810 features an increased data input rate (compared with the older UCN/UCQ5810-F) and a controlled output slew rate.
The CMOS shift register and latches allow direct interfacing with microprocessor-based systems. With a 3.3 or 5 V logic supply, serial data-input rates of at least 10 MHz can be attained
A CMOS serial data output permits cascaded connections in applications requiring additional drive lines. Similar devices are available as the A6812 (20-bit) and A6818 (32-bit).
The A6810 output source drivers are NPN Darlingtons, capable of sourcing up to 40 mA. The controlled output slew rate reduces electromagnetic noise, which is an important consideration in systems that include telecommunications and microprocessors, and to meet government emissions regulations. For inter-digit blanking, all output drivers can be disabled and all sink drivers turned on with a BLANKING input high. The PNP active pulldowns can sink at least 2.5 mA.
The A6810 is available in three temperature ranges for optimum performance in commercial (S), industrial (E), and automotive (K) applications. It is provided in two package styles, through-hole DIP (package A) and surface-mount SOIC (package LW). Copper leadframes, low logic-power dissipation, and low output-saturation voltages allow all devices to source 25 mA from all outputs continuously over the full operating tem pera ture range.
The lead (Pb) free versions have 100% matte tin leadframe plating.
| Part Number | Package Type | RoHS Compliant |
Part Composition/ RoHS Data |
Temperature | Comments | Samples | Distributor Stock |
|---|---|---|---|---|---|---|---|
| A6810SA-T | 18-pin DIP | Yes | view data | -20 °C to 85 °C |
Contact Local Sales Representative or check distributor stock |
||
| A6810SLW-T | 20-lead SOIC | Yes | view data | -20 °C to 85 °C |
Contact Local Sales Representative or check distributor stock |
||
| A6810SLWTR-T | 20-lead SOIC | Yes | view data | -20 °C to 85 °C |
Contact Local Sales Representative or check distributor stock |
||
| A6810EA-T | 18-pin DIP | Yes | view data | -40 °C to 85 °C | not for new design |
Contact Local Sales Representative or check distributor stock |
|
| A6810ELW-T | 20-lead SOIC | Yes | view data | -40 °C to 85 °C |
Contact Local Sales Representative or check distributor stock |
||
| A6810ELWTR-T | 20-lead SOIC | Yes | view data | -40 °C to 85 °C |
Contact Local Sales Representative or check distributor stock |
||
| A6810KA-T | 18-pin DIP | Yes | view data | -40 °C to 125 °C |
Contact Local Sales Representative or check distributor stock |
||
| A6810KLW-T | 20-lead SOIC | Yes | view data | -40 °C to 125 °C | not for new design |
Contact Local Sales Representative or check distributor stock |
|
| A6810KLWTR | 20-lead SOIC | No | view data | -40 °C to 125 °C | discontinued on April 25, 2008; refer to A6810KLWTR-T. not for new design |
Contact Local Sales Representative or check distributor stock |
|
| A6810KLWTR-T | 20-lead SOIC | Yes | view data | -40 °C to 125 °C | not for new design |
Contact Local Sales Representative or check distributor stock |
Allegro's products are not to be used in life support devices or systems, if a failure of an Allegro product can reasonably be expected to cause the failure of that life support device or system, or to affect the safety or effectiveness of that device or system.