Allegro MicroSystems, LLC Announces New Programmable Unipolar Hall-Effect Switch With Built In Diagnostics

Designed with an Externally Enabled Diagnostic Function and User-Programmable Switchpoints

May 31, 2016

Product Image

Allegro MicroSystems, LLC announces a new unipolar Hall-effect switch with an externally enabled diagnostic function and user-programmable switchpoints. Allegro’sA1162 has on-chip electromagnetic coils that are used to implement self-test of the sensor’s entire magnetic and electrical signal chain. It is designed for systems where precise magnet switchpoints and safety, reliability, or both, are critical, such as those designed to meet the requirements of ISO 26262. In normal operating mode, the A1162 functions as a standard unipolar Hall-effect switch. The device output transistor turns on (output signal switches low) in the presence of sufficient magnetic field (>BOP max). The output transistor of the A1162 switches off (output signal switches high) when the magnetic field is removed (<BRP min). Key automotive applications include shift selectors (PRNDL), seat belt buckles and brake sensors.

When the diagnostic feature is enabled, the output of the A1162 provides a square wave output which confirms the device is properly sensing the internally generated magnetic field. 

Therefore, use of the A1162 either eliminates the need for redundant sensors in safety-critical applications or increases robustness in safety-critical applications that might otherwise require redundant sensors (drive-by-wire systems, etc.).

This monolithic IC integrates a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilization, Schmitt trigger, and short-circuit-protected open-collector output able to sink up to 25 mA. The on-board regulator permits operation with supply voltages of 3.8 to 24 V. It is temperature-stable and stress-resistant, making it especially suited for operation over temperature ranges up to 150ºC (L temperature range). Superior high-temperature performance is made possible through advanced dynamic offset cancellation techniques, which reduce the residual offset voltage normally caused by device overmolding, temperature dependencies, and thermal stress.



Allegro MicroSystems, LLC は、高性能半導体の開発、製造、マーケティングにおけるリーダーです。Allegro の革新的なソリューションは、自動車などの急成長している分野で広く採用されているほか、オフィス オートメーション、工業、コンシューマー/通信市場でも注目されています。Allegro の本社は米国マサチューセッツ州ウースターにあり、設計、アプリケーション、営業サポートなどの拠点を世界中に展開しています。Allegro の詳細については、www.allegromicro.com をご覧ください。

 


記事に関するお問い合わせ:

Stephanie Fennelly
マーケティング広報担当ディレクター
電話: (508) 854-5363
sfennelly@allegromicro.com
.

Copyright © 2017 Allegro MicroSystems, LLC

サイトマップ  |  個人情報保護に関する方針  |  Web マスターへのお問い合わせ

Follow us on: LinkedIn YouTube Google+ Follow Allegro on Twitter