ARG81400: Buck or Buck/Boost Pre-Regulator with a Synchronous Buck, 5 Internal Linear Regulators, Pulse-Width Watchdog Timer, and SPI

The ARG81400 is a power management IC that uses a buck or buck/boost pre-regulator to efficiently convert automotive battery voltages into a tightly regulated intermediate voltage complete with control, diagnostics and protections. The output of the pre-regulator supplies five linear regulators— 3.3 V / 90 mA, 5 V / 200 mA, 5 V / 30 mA, 5 V / 55 mA, and 5 V /100 mA (short-battery protected)—and an adjustable output, 600 mA synchronous buck. Designed for high-temperature operation, the ARG81400 is ideal for under-hood applications.

Enable inputs to the ARG81400 include a logic level (ENB) and a high-voltage (ENBAT). The ARG81400 also provides flexibility with disable function of the individual 5 V rails through a serial peripheral interface (SPI).

Diagnostic outputs from the ARG81400 include a power-onreset output (NPOR), an ENBAT status output, and a fault flag output to alert the microprocessor that a fault has occurred. The microprocessor can read fault status through SPI. Dual bandgaps, one for regulation and one for fault checking, improve safety coverage and fault detection of the ARG81400.

The ARG81400 contains a Window Watchdog timer with a programmable detect period of 250, 500, 1000, or 2000 μs. The watchdog timer enters an active state after NPOR transitions high and the processor has exercised the WD Test routine. The watchdog can be put into flash mode or be reset via secure SPI commands.

Protection features include undervoltage and overvoltage on all output rails. In case of a shorted output, all linear regulators feature foldback overcurrent protection. In addition, the V5P output is protected from a short-to-battery event. Both switching regulators include pulse-by-pulse current limit, hiccup mode short-circuit protection, LX short-circuit protection, missing asynchronous diode protection (VREG only) and thermal shutdown.

The ARG81400 is supplied in a low-profile (1.2 mm maximum height) 38-lead eTSSOP package (suffix “LV”) with exposed power pad.

A2-SIL™ pending—device features for safety critical systems

APPLICATIONS

  • Electronic Power Steering (EPS)
  • Transmission Control Units (TCU)
  • Advanced Braking Systems (ABS)
  • Emissions Control Modules
  • Other automotive applications
DATASHEETS
SAMPLE & BUY

Astrorep Inc. (Allegro およびサンケン半導体、サンケン電源)
141 John Street, Suite 300
Babylon, NY 11702
電話: (631)422-2500
ファックス: (631)422-2504
Web: www.astrorepinc.com
電子メール: donna.tweedy@astrorepinc.com

If this is not your local representative, find your local sales rep here.

RECEIVE PRODUCT ALERTS
We'll notify you when there are updates to this product. Sign Up
  • Features and BenefitsFeatures and Benefits
  • PackagingPackaging
  • Technical DocsTechnical Docs
  • NewsNews
  • A2-SIL™ pending—device features for safety critical systems
  • Automotive AEC-Q100 qualified
  • Wide input voltage range, 3.8 to 40 VIN operating range, 50 VIN maximum
  • Buck or buck/boost pre-regulator (VREG)
  • Adjustable 1.25 to 3.3 V synchronous buck
  • Four internal linear regulators with foldback short-circuit protection, 3.3 V (3V3) and three 5 V (V5CAN, V5A, and V5B)
  • One internal 5 V linear regulator (V5P) with foldback short-circuit and short-to-battery protection
  • Power-on reset signal indicating a fault on the synchronous buck, 3V3 or V5A regulator outputs (NPOR)
  • Window watchdog timer with fail-safe features
  • Dual bandgaps for increased safety coverage and fault detection, BGVREF, BGFAULT
  • Control and diagnostic reporting through a serial peripheral interface (SPI)
  • Logic enable input (ENB) for microprocessor control
  • Ignition enable input (ENBAT) with status indicator output
  • Frequency dithering and controlled slew rate helps reduce EMI/EMC
  • OV and UV protection for all output rails
  • Pin-to-pin and pin-to-ground tolerant at every pin
ARG81400 Packages

There are no news items available for this product.

Click the image to view larger
ARG81400 Product Image ARG81400 Block Giagram

部品番号の仕様およびライフサイクル ステータス

Part Number Package Type Temperature RoHS
適合
部品構成 /
RoHS データ
Comments Samples 代理店の
在庫確認
APEK81400KLV-01-MH DEMO BOARD -40°C to 150°C N -- 最新情報
地域の販売担当者へのお問い合わせ
在庫の確認
ARG81400KLVATR 38-lead TSSOP -40°C to 150°C Y データを見る 最新情報
地域の販売担当者へのお問い合わせ
在庫の確認

Allegro 製品が生命維持装置やシステムの故障の原因となることが予期できる場合、または安全性や有効性に影響を及ぼすことが予想できる場合、そのような生命維持装置やシステムに Allegro 製品はご使用いただけません。

Copyright © 2017 Allegro MicroSystems, LLC

サイトマップ  |  個人情報保護に関する方針  |  Web マスターへのお問い合わせ

Follow us on: LinkedIn YouTube Google+ Follow Allegro on Twitter