- Design Center
- About Allegro
January 4, 2016
Worcester, MA – Allegro MicroSystems, LLC introduces a new family of full-bridge gate driver ICs designed to drive a wide range of DC brushed motors with simple logic from a microprocessor. The A4955, A4956, and A5957 devices can support motor supply voltages up to 50 V and load currents of up to 20 A. These devices are targeted for both the industrial and consumer markets in applications such as robotic vacuums, vending machines, cash dispensing machines, coffee vending machines, ticketing machines, automatic gates and turnstiles, and sewing machines.
Flexible interface options are offered in three individual products which means there is a product that will fit into customers existing solution with little or no firmware changes:
Unique features of the A4955, A4956, and A5957 include AIOUT function. This analog output can be used to monitor current through the external sense resistor (if used). A sample-and-hold is used to capture the peak voltage across the sense resistor and hold that value during the off time until the next PWM cycle begins. The voltage is gained by a factor of 10 and fed to the AIOUT terminal providing the customer the ability to accurately estimate the current in the load in real-time. Another unique feature is the programmable gate drive. An external resistor sets the magnitude of the current into the gates of the external FET bridge allowing the customer to control the slew rate of the driver to help achieve EM compliance.
Other key features include internal pulse width modulation (PWM) current control. Peak current is regulated with a fixed offtime PWM regulator, the peak current is selected by the voltage on the VREF terminal. In addition an overcurrent flag notifies the user when the device is actively PWM limiting the current in the load.
Protection features include VDS sensing. Monitoring the VDS of the external MOSFET provides protection in case of bridge/motor shorts. Undervoltage lockout prevents the need for power sequencing, cross-over current protection for driving wide range of FETS and thermal shutdown. The A4955 and A4956 devices are supplied in a low-profile 4x4 mm, 20-contact QFN package (suffix “ES”) as well as in a 20-lead eTSSOP (suffix “LP”), both with exposed power tab. The A5957 is only supplied in the low-profile, 4x4 mm, 20-contact QFN package (suffix “ES) with exposed power pad.
Allegro MicroSystems, LLC is a leader in developing, manufacturing and marketing high-performance semiconductors. Allegro's innovative solutions serve high-growth applications within the automotive market, with additional focus on office automation, industrial, and consumer/communications solutions. Allegro is headquartered in Worcester, Massachusetts (USA) with design, applications, and sales support centers located worldwide. Further information about Allegro can be found at www.allegromicro.com.