ACS71020: Single Phase, Isolated, Power Monitoring IC with Voltage Zero Crossing and Overcurrent Detection

The ACS71020 power monitoring IC greatly simplifies the addition of power monitoring to any AC/DC powered device. By making use of Allegro’s Hall-effect-based, galvanically isolated integrated current sensor technology, reinforced isolation can be achieved. The sensor can be powered from the same supply as the MCU, eliminating the need for multiple power supplies and digital isolation ICs.

The isolated current measurement is done by detecting the magnetic field from the integrated conductor, eliminating the need for external sense resistors, current transformers, or Rogowski coils. Two Hall plates are used for this measurement to deferentially sense the field, thus eliminating errors due to stray magnetic fields. Multiple parameters like bandwidth, averaging time, and fault levels are user-programmable.

The sensor features all key power measurements, which can be read out through I2C or SPI, as well as dedicated pins for voltage zero crossing (suitable for light-dimming applications) and fast overcurrent fault (for short-circuit detection). As the sensor is isolated, these pins can be easily accessed by the MCU without additional isolation to each signal. These two pins can also be configured to flag a VRMS under/overvoltage.

The ACS71020 is provided in a small, low-profile, surface-mount SOIC16 wide-body package. The ACS71020 is lead (Pb) free, and is fully calibrated prior to shipment from the factory. Further customer calibration in application can improve accuracy.

DATASHEETS
Contact Allegro Marketing for datasheet
SAMPLE & BUY

Astrorep Inc. (Allegro and Sanken Semiconductors, Sanken Power Supplies)
700 Veterans Memorial Hwy
Suite 310
Hauppauge, NY 11788
Phone: (631)422-2500
Fax: (631)422-2504
Web: www.astrorepinc.com
Email: donna.tweedy@astrorepinc.com

If this is not your local representative, find your local sales rep here.

RECEIVE PRODUCT ALERTS
We'll notify you when there are updates to this product. Sign Up
  • Features and BenefitsFeatures and Benefits
  • PackagingPackaging
  • Technical DocsTechnical Docs
  • NewsNews
  • Accurate power monitoring of AC/DC applications
  • Reinforced isolation up to 517 VRMS in a single package eliminates the need for dual isolated supplies
  • Active, reactive, and apparent power measurements, and power factor
  • RMS and instantaneous voltage and current measurements
  • 0.85 mΩ primary conductor resistance for low power loss and high inrush current withstand capability
  • Dedicated voltage zero crossing pin
  • Overcurrent fault output pin
  • Hall-effect-based current measurement with common mode stray field rejection
  • User-programmable VRMS under/overvoltage pin
  • 1 kHz bandwidth
  • Current-sensing range from 0 to 90 A
  • I2C or SPI communication
  • User-programmable through EEPROM registers
  • 16-bit voltage and current ADCs

Click the image to view larger
ACS71020 ACS71020 ACS71020

Part Number Specifications and Availability

Part Number Package Type Temperature RoHS
Compliant
Part Composition /
RoHS Data
Comments Samples Check
Distributor Stock
ACS71020KMABTR-015B5-SPI 16-lead SOIC -40°C to 125°C Yes View Data New Contact your
local sales rep
Check Stock
ACS71020KMABTR-030B3-I2C 16-lead SOIC -40°C to 125°C Yes View Data New Contact your
local sales rep
Check Stock
ACS71020KMABTR-030B3-SPI 16-lead SOIC -40°C to 125°C Yes View Data New Contact your
local sales rep
Check Stock
ACS71020KMABTR-090B3-I2C 16-lead SOIC -40°C to 125°C Yes View Data New Contact your
local sales rep
Check Stock
ASEK71020KMAB-015B5-SPI DEMO BOARD -40°C to 125°C No -- New Contact your
local sales rep
Check Stock
ASEK71020KMAB-030B3-I2C DEMO BOARD -40°C to 125°C No -- New Contact your
local sales rep
Check Stock
ASEK71020KMAB-030B3-SPI DEMO BOARD -40°C to 125°C No -- New Contact your
local sales rep
Check Stock
ASEK71020KMAB-090B3-I2C DEMO BOARD -40°C to 125°C No -- New Contact your
local sales rep
Check Stock

Allegro’s products are not to be used in any devices or systems, including but not limited to life support devices or systems, in which a failure of Allegro’s product can reasonably be expected to cause bodily harm.

Sitemap   |   Privacy Policy   |   Cookie Notice   |   Contact Webmaster
Careers   |   Contact Sales   |   Home   |   Legal   |   Quality & Environment   |   Request Samples
Follow us on:  LinkedIn  YouTube  Follow Allegro on Twitter
Copyright © 2019 Allegro MicroSystems, LLC