- Design Center
- About Allegro
The A8672 is a synchronous buck converter capable of delivering up to 8 A. The A8672 utilizes valley current mode control, allowing very short on-times to be achieved. This makes it ideal for applications that require very low output voltages relative to the input voltage, combined with high switching frequencies. Valley current mode control inherently provides improved transient response over traditional switcher schemes, through the use of a voltage feedforward loop and frequency modulation during large signal load changes.
The A8672 includes a comprehensive set of diagnostic flags, allowing the host platform to react to a myriad of different conditions. A fault output indicates when either the temperature is becoming unusually high, or a single point failure has occurred; for example, the switching node (LX) shorted to ground, or the timing resistor going open-circuit. A Power OK (POK) output is also provided after a fixed delay, to indicate when the output voltage is within regulation. The selectable pulse-by-pulse current limit avoids the requirement to oversize the inductor to cope with large fault currents.
The device package (EG) is a 28-contact, 4 mm × 5 mm, 0.75 mm nominal overall height QFN with exposed thermal pad. The package is lead (Pb) free, with 100% matte tin leadframe plating.
This part is discontinued. Samples are no longer available. Date of status change: September 1, 2016. Recommended Substitutions: For existing customer transition, and for new customers or new applications, contact Allegro Sales.
Astrorep Inc. (Allegro and Sanken Semiconductors,
Sanken Power Supplies)
700 Veterans Memorial Hwy
Hauppauge, NY 11788
If this is not your local representative, find your local sales rep here.
|Part Number||Package Type||Temperature||RoHS
|Part Composition /
|A8672EEGTR-T||28-lead QFN||-40°C to 85°C||Yes||View Data||Discontinued||Contact your
local sales rep