- Design Center
- About Allegro
Designed to provide the power supply requirements for a wide range of applications, the A4492 provides three high current, high performance, switching regulator outputs with independent soft start.
High frequency switching allows selection of inexpensive inductors and small ceramic output capacitors. The turn-on cycles of the regulators are interleaved to minimize stresses on the input capacitors and to reduce EMI. A charge pump is used to provide the supply for driving the power switches, ensuring operation at very wide operating duty cycles and avoiding the need for power-draining clamp circuits.
A power-on-reset circuit with user configurable delay indicates when enabled regulators are in specification. The power-onreset flag also indicates when the input voltage drops below specification, giving the system controller advance warning while the switchers continue to operate down to the shutdown level.
Internal diagnostics provide comprehensive protection against overloads, input undervoltages, and overtemperatures.
The A4492 is provided in a 20-contact, 4 mm × 4 mm, 0.75 mm nominal overall height QFN, with exposed pad for enhanced thermal dissipation. It is lead (Pb) free, with 100% matte tin leadframe plating.
This device is in production, however, it has been deemed Pre-End of Life. The product is approaching end of life. Within a minimum of 6 months, the device will enter its final, Last Time Buy, order phase. Date of status change: December 5, 2018.
Recommended Substitutions: A4490.
Astrorep Inc. (Allegro and Sanken Semiconductors,
Sanken Power Supplies)
700 Veterans Memorial Hwy
Hauppauge, NY 11788
If this is not your local representative, find your local sales rep here.
There are no news items available for this product.
|Part Number||Package Type||Temperature||RoHS
|Part Composition /
|A4492EESTR-T||20-lead QFN||-40°C to 85°C||Yes||View Data||pre-EOL||Contact your
local sales rep
|APEK4492EES-01-T||DEMO BOARD||-40°C to 85°C||No||--||pre-EOL||Contact your
local sales rep