Quality Standards and Environmental Certifications
×

Contact Sales

Have Questions? Let us help!

We're passionate about innovation. Reach out and you'll hear back from an expert shortly.

Required*

This field is required

This field is required

Please enter a valid Email Address

This field is required

This field is required

This field is required

This field is required

This field is required

This field is required

Thank you for connecting with us!

One of our solution experts will be in touch with you shortly. Keep reading to learn more about our industry leading solutions.


Allegro MicroSystems, Inc. Announces New 120 kHz Bandwidth, High Voltage, 3.3. V Current Sensor IC

3月 29, 2012

With Integrated Overcurrent Detection

Worcester, MA – Allegro MicroSystems, Inc. announces an open loop Hall-effect sensor IC with near closed loop performance (in accuracy and bandwidth). Allegro’s ACS716 current sensor IC provides an economical and precise means for current sensing applications in industrial, commercial, and communications systems. The device is offered in a small footprint surface mount package that allows easy implementation in customer applications, and is optimized for 3.3 V supply operation.

The ACS716 consists of a precision linear Hall sensor integrated circuit with a copper conduction path located near the surface of the silicon die. Applied current flows through the copper conduction path, and the analog output voltage from the Hall sensor IC linearly tracks the magnetic field generated by the applied current. The accuracy of the ACS716 is maximized with this proprietary packaging configuration because the Hall element is situated in extremely close proximity to the current to be measured.

High level immunity to current conductor dV/dt and stray electric fields, offered by Allegro proprietary integrated shield technology, guarantees low ripple at output and low offset drift in high-side, high voltage applications. The voltage on the overcurrent input (VOC pin) allows customers to define an overcurrent fault threshold for the device. When the current flowing through the copper conduction path (between the IP+ and IP– pins) exceeds this threshold, the open drain overcurrent fault pin will transition to a logic low state. Factory programming of the linear Hall sensor IC inside of the ACS716 results in exceptional accuracy in both analog and digital output signals.

The internal resistance of the copper path used for current sensing is typically 1 mΩ, for low power loss. Also, the current conduction path is electrically isolated from the low voltage sensor inputs and outputs. This allows the ACS716 family of sensor ICs to be used in applications requiring electrical isolation, without the use of opto-isolators or other costly isolation techniques.