The A6270-1 is a linear, programmable current controller capable of accurately regulating LED current in two strings with external MOSFETs. The LED current can be switched between high current and low current for Stop/Tail or DRL/position applications. The two LED current levels from each output are set by two sense resistors. Current reference accuracy for each string current is better than ±4%.
Driving LEDs with constant current ensures safe operation with maximum possible light output. ICs can be connected in parallel in a master-slave arrangement for larger lighting applications.
Drain short-to-ground detection is provided for both external MOSFETs. The A6270-1 also offers MOSFET drain short-to- VIN and open LED fault protection. The MODE pin controls the action of the IC in case of a fault.
A temperature monitor is included to reduce the LED drive current if the chip temperature exceeds a thermal threshold.
An input voltage monitor is included to reduce LED current if VIN rises above 17 V. The device package is a 16-pin TSSOP (LP), with exposed pad for enhanced thermal dissipation. The package is lead (Pb) free, with 100% matte-tin leadframe plating.
Allegro 製品が生命維持装置やシステムの故障の原因となることが予期できる場合、または安全性や有効性に影響を及ぼすことが予想できる場合、そのような生命維持装置やシステムに Allegro 製品はご使用いただけません。