内燃机 (ICE) 摩托车和踏板车

P0255: This article discusses the challenges that two-wheeler designers face when switching to an EFI system, notably a 100 ms fast startup requirement.

This article discusses how using a common platform for both 12V and 48V starter generator systems will simplify and ease the transition to 48V solutions, as the electrical revolution continues to transform the automotive industry.

Our advanced sensor and power IC solutions are engineered specifically to meet the unique requirements of these designs, providing superior performance and reliability in harsh environments and under complex operating conditions.

AN296207 - In two-wheeler stop and tail light applications, particularly those that use a Rear Combination Lamp (RCL), OEMs use LEDs instead of incandescent bulbs to ensure longer application life.

AN296173 - The use of electronic controls for engine, transmission, and wheel speed in two- and three-wheeled vehicles is growing, particularly in developing nations. This trend is largely driven by mandates to improve air quality, fuel efficiency, and vehicle safety worldwide.

This is to certify that representative samples of the product as specified on this certificate were tested according to the current UL requirements for the ACS717, ACS718, ACS722, ACS723, ACS724, ACS725, ACS71020, ACS732, ACS733, ACS37024 and ACS37002.

AN296300: This application note discusses: 1) the Allegro integrated current sensor package constructions (MA, MC, LC, and LZ) and how they affect thermal metrics; 2) industry-standard thermal metrics; 3) methods that can be used for thermal measurements to quantify the metrics in a particular application; and 4) thermal results of the Allegro current sensor evaluation boards.

IEC system for mutual recognition of test certificates for electrical equipment (IECEE) CB scheme for the ACS717, ACS718, ACS722, ACS723 and ACS724.

IEC system for mutual recognition of test certificates for electrical equipment (IECEE) CB scheme for the ACS717, ACS718, ACS722, ACS723 and ACS724.

AN296175 - Accuracy requirements for absolute mechanical edge detection on cam sensors and more generally on engine management speed sensors have noticeably increased with the need for power optimization and emissions control in car engines being sold today.

AN26030 - In applications where large magnetic fields may be present, care must be taken in the alignment and spacing of the Hall element relative to those fields.