A1335: Angle Sensor IC with I²C, SPI, and SENT Interfaces

Product Image

Description

Top Features

The A1335 is a 360° contactless high-resolution programmable magnetic angle position sensor IC. It is designed for digital systems and is capable of communicating via an I2C, SPI, or SENT interface.

This system-on-chip (SoC) architecture includes a front end based on Circular Vertical Hall (CVH) technology, programmable microprocessor-based signal processing, and features an interface capable of supporting I2C, SPI, and SENT. Besides providing full-turn angular measurement, the A1335 also provides scaling for angle measurement applications less than 360°. It includes on-chip EEPROM technology, capable of supporting up to 100 read/write cycles, for flexible programming of calibration parameters.

Digital signal processing functions, including temperature compensation and gain/offset trim, as well as advanced output linearization algorithms, provide an extremely accurate and linear output for both end-of-shaft applications as well as off‑axis applications.

The A1335 is ideal for automotive applications requiring high-speed 360° angle measurements, such as: electronic power steering (EPS), transmission, torsion bar, and other systems that require accurate measurement of angles. The A1335 linearization schemes were designed with challenging off-axis applications in mind.

The A1335 is available as a single die in a 14-pin TSSOP, or dual die in a 24-pin TSSOP. Both packages are lead (Pb) free with 100% matte-tin leadframe plating.

  • 360° contactless high-resolution angle position sensor
  • CVH (Circular Vertical Hall) technology
  • Available with either a single die or dual independent die housed within a single package
  • Digital output format selectable among SPI, I2C, and SENT (Single-Edge Nibble Transmission)
  • SENT output is SAEJ2716 JAN2010 compliant, with Allegro proprietary enhanced programmable features
  • Customer-programmable SENT tick times, ranging from 0.5 to 7.9 μs
  • SPI interface allows use of multiple independent sensor ICs for applications requiring redundancy
  • Refresh rate: 32 μs, 12-bit resolution
  • Wide range of diagnostics enable automotive applications to achieve ASIL-D compliance
  • Programmable via Manchester encoding on the VCC line, reducing external wiring
  • Automotive temperature range: –40°C to 150°C
  • AEC-Q100 automotive qualified
  • Two types of linearization algorithms offered: harmonic linearization and segmented linearization
    • Enables off-axis operation
  • Programmable range—can scale 22.5° to full-scale digital output
  • Microprocessor-based output linearization
  • EEPROM with Error Correction Control (ECC) for trimming calibration
  • 1 mm thin (TSSOP) package
  • Improved air gap performance, based on continuous background calibration
  • Allegro Sensor Bias LDO

Part Number Specifications and Availability

Part Number Package Type Temperature RoHS
Compliant
Part Composition /
RoHS Data
Comments Samples Check Stock
ASEK-1335-SUBKIT-T n/a -20°C to 85°C -- View Data Contact your
local sales rep
Check
Distributor Stock
ASEK-1335-T-KIT n/a -20°C to 85°C -- View Data Contact your
local sales rep
Check
Distributor Stock
A1335LLETR-DD-T 24-lead TSSOP -40°C to 150°C Yes View Data Contact your
local sales rep
Check
Distributor Stock
A1335LLETR-T 14-lead TSSOP -40°C to 150°C Yes View Data Contact your
local sales rep
Check
Distributor Stock

Allegro 製品が生命維持装置やシステムの故障の原因となることが予期できる場合、または安全性や有効性に影響を及ぼすことが予想できる場合、そのような生命維持装置やシステムに Allegro 製品はご使用いただけません。

洞察と革新

Featured Third Party Boards and Tools


PWR Meter 3 Demo Board

Angle click is a precise Hall-effect angle sensing click board that can be used to measure the rotational angle of the magnetic field in the X-Y plane above it (parallel to the surface of the click), through the whole range of 360°.


Buy Now