The ATS693LSG is an optimized Hall-effect integrated circuit (IC) and rare earth pellet combination that provides a user-friendly solution for direction detection and true zero-speed, digital gear tooth sensing. The small package can be assembled simply and used in conjunction with a wide variety of gear tooth sensing applications.
The IC employs patented algorithms for the special operational requirements of automotive transmission applications. The speed and direction of the target are communicated through a variable pulse width output protocol. The ATS693 is particularly adept at handling vibration without sacrificing maximum air gap capability or creating any erroneous direction information. Even higher angular vibration caused by engine cranking is completely rejected by the device. The advanced vibration detection algorithm systematically calibrates the sensor IC on the initial teeth of true target rotation and not on vibration, always guaranteeing an accurate signal in running mode.
Advanced signal processing and innovative algorithms make the ATS693 an ideal solution for a wide range of speed and direction sensing needs.
This device is available in a lead (Pb) free 4-pin SIP package with a 100% matte tin plated leadframe.
Allegro’s products are not to be used in any devices or systems, including but not limited to life support devices or systems, in which a failure of Allegro’s product can reasonably be expected to cause bodily harm.
Allegro MicroSystems uses the latest integrated circuit technology in combination with the century-old Hall effect to produce Hall-effect ICs. These are contactless, magnetically activated switches and sensor ICs with the potential to simplify and improve electrical and mechanical systems.Learn More
As technology improves, Hall-effect sensor ICs are finding their way into many modern household appliances. The Hall effect refers to the measurable voltage that appears across a conductive material.Learn More
The ever-evolving requirements of the automotive, industrial, and commercial markets for increased reliability and functionality will continue to drive demand for electronic content, including non-contact magnetic sensor ICs with diagnostics.Learn More
AN29006 - This document describes typical soldering methods that have been proven effective with Allegro™ products. It provides information on SMD (surface mount devices) and through-hole packages. Both lead (Pb) free and traditional Pb-based technologies are examined.Learn More
Magnetic circuit elements and the use of high-temperature materials have resulted in lower total system costs for manufacturers using them in final sensor module products. Innovative package design and assembly technology have produced smaller, more powerful devices.Learn More
This document covers most of the assembly methods used for mounting Hall-effect devices. In Allegro® Hall-effect devices, the signal is conditioned and optimized for various types of magnetic inputs to produce a suitable electrical output.Learn More
AN296080 - This application note provides specific information and general ideas to consider when designing tools to accomplish the final preparation of the device. The application note Guidelines for Designing Subassemblies Using Hall-Effect Devices, AN27703, must be used in conjunction with this ...Learn More