ACS72981: High-Precision Linear Hall-Effect-Based Current Sensor IC With 200 μΩ Current Conductor


The ACS72981 family of current sensor ICs provides economical and precise solutions for AC or DC current sensing. A 250 kHz bandwidth makes it ideal for motor control, load detection and management, power supply and DC-to-DC converter control, and inverter control. The <2 μs response time enables overcurrent fault detection in safety-critical applications.

The device consists of a precision, low-offset linear Hall circuit with a copper conduction path located near the die. Applied current flowing through this copper conduction path generates a magnetic field which the Hall IC converts into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer. A precise, proportional output voltage is provided by the low-offset, chopper-stabilized BiCMOS Hall IC, which is programmed for accuracy at the factory. Proprietary digital temperature compensation technology greatly improves the zero output voltage and output sensitivity accuracy over temperature and lifetime.

The output of the device increases when an increasing current flows through the primary copper conduction path (from terminal 5 to terminal 6), which is the path used for current sampling. The internal resistance of this conductive path is 200 μΩ typical, providing low power loss and increasing power density in the application.

The sensor employs differential sensing techniques that virtually eliminate output disturbance due to common-mode interfering magnetic field.

The thickness of the copper conductor allows survival of the device at high overcurrent conditions. The terminals of the conductive path are electrically isolated from the signal leads (pins 1 through 3).

The device is fully calibrated prior to shipment from the factory. The ACS72981 family is lead (Pb) free. All leads are plated with 100% matte tin, and there is no Pb inside the package. The heavy gauge leadframe is made of oxygen-free copper.

Top Features

  • High-bandwidth 250 kHz analog output
  • Less than 2 μs output response time
  • 3.3 V and 5 V supply operation
  • Ultralow power loss: 200 μΩ internal conductor resistance
  • Industry-leading noise performance and increased
  • bandwidth through proprietary amplifier and filter design techniques
  • Greatly improved total output error through digitally programmed and compensated gain and offset over the full operating temperature range
  • Small package size, with easy mounting capability
  • Monolithic Hall IC for high reliability
  • Output voltage proportional to AC or DC currents
  • Factory-trimmed for accuracy
  • Extremely stable zero amp output offset voltage over temperature and lifetime

Part Number Specifications and Availability

Part Number Package Type Temperature RoHS
Part Composition /
RoHS Data
Comments Samples Check Stock
ACS72981KLRATR-150B3 7-lead SOT -40°C to 125°C Yes View Data Contact your
local sales rep
Distributor Stock
ACS72981KLRATR-150B5 7-lead SOT -40°C to 125°C Yes View Data Contact your
local sales rep
Distributor Stock
ACS72981LLRATR-050B5 7-lead SOT -40°C to 150°C Yes View Data Contact your
local sales rep
Distributor Stock
ACS72981LLRATR-100B5 7-lead SOT -40°C to 150°C Yes View Data Contact your
local sales rep
Distributor Stock

Allegro 製品が生命維持装置やシステムの故障の原因となることが予期できる場合、または安全性や有効性に影響を及ぼすことが予想できる場合、そのような生命維持装置やシステムに Allegro 製品はご使用いただけません。

Allegro MicroSystems、LLCは、参考のためにGerberファイルを提供しています。いかなる資料、情報、または説明も現状のまま提供され、いかなる保証もありません。ユーザーの特定の用途に合わせて、プリント回路基板(PCB)のレイアウトを最適化すること、およびコンポーネントを選択することはユーザーの責任です。