The A1340 device is a high precision, programmable Hall effect linear sensor integrated circuit (IC) for both automotive and non-automotive applications. The signal path of the A1340 provides flexibility through external programming that allows the generation of an accurate, and customized output voltage from an input magnetic signal. The A1340 provides 12 bits of output resolution, and supports a maximum bandwidth of 3 kHz.
The BiCMOS, monolithic integrated circuit incorporates a Hall sensor element, precision temperature-compensating circuitry to reduce the intrinsic sensitivity and offset drift of the Hall element, a small-signal high-gain amplifier, proprietary dynamic offset cancellation circuits, and advanced output linearization circuitry.
With on-board EEPROM and advanced signal processing functions, the A1340 provides an unmatched level of customer reprogrammable options for characteristics such as gain and offset, bandwidth, and output clamps. Multiple input magnetic range and signal offset choices can be preset at the factory. In addition, the device supports separate hot and cold, 1st and 2nd order temperature compensation.
A key feature of the A1340 is its ability to produce a highly linear device output for nonlinear input magnetic fields. To achieve this, the device divides the output into 32 equal segments and applies a unique linearization coefficient factor to each segment. Linearization coefficients are stored in a look-up table in EEPROM.
The A1340 sensor is available in a lead (Pb) free 4-pin single in-line package (KT suffix), with 100% matte tin leadframe plating.
This device is in production, however, it has been deemed Pre-End of Life. The product is approaching end of life. Within a minimum of 6 months, the device will enter its final, Last Time Buy, order phase.
Date of status change: September 3, 2018
Recommended Substitutions: Contact Allegro Marketing
Allegro’s products are not to be used in any devices or systems, including but not limited to life support devices or systems, in which a failure of Allegro’s product can reasonably be expected to cause bodily harm.
Sensor output can change over temperature due to sensor imperfections or temperature-dependent properties of the magnetic system. The purpose of applying temperature compensation inside the sensor is to keep the sensor output value independent of the temperature and only dependent on the input ...Learn More
Hall-based fuel level sensor ICs are developed to provide high reliability and accurate fuel level sensing for automotive applications. The application of linear and angle sensor ICs for coil-based and digital cluster indicators is presented in this applications note.Learn More